INDOLIGA SPR 250

In Stock

Product Description
INDOLIGA SPR 250 is based on a Hybrid type unique carboxylate polymer with Different lateral chains. This greatly improves cement dispersion.
INDOLIGA SPR 250 combines the properties of High Range water reduction and Slump retaining. It allows the production of high performance concrete and/or concrete with high range water reduction and extended workability.
INDOLIGA SPR 250 is a particularly strong super plasticiser allowing production of consistent concrete properties around the Specified dosage.

Disclaimer: Results may vary upon Trails
Water Reduction Vs Retention
Uses:
INDOLIGA SPR 250 is a high performance super plasticiser intended for applications where increased early and ultimate compressive strengths are required, and it has been developed for use in:
• Self compacting concrete
• Pumped concrete
• Concrete requiring long workability retention
• High performance concrete

Advantages:
• Increased flexural strength
• Higher E modulus
• Improved adhesion to reinforcing and stressing steel
• Better resistance to carbonation
• Lower permeability
• Better resistance to aggressive atmospheric conditions
• Reduced shrinkage and creep
• Increased durability

Properties
Appearance : Clear Yellow to Reddish brown colored liquid
pH : 5.5 to 7.0
Solid Content : 50% +/− 1
Specific gravity: 1.10 +/− 0.5
Chloride content: Nil

Storage:
INDOLIGA SPR 250 has a minimum shelf life of 12 months provided the temperature is kept within the range of 2°C to 50°C. Should the temperature of the product fall outside this range then contact us for advice

Packaging

• INDOLIGA SPR 250 is available in 225 KG drums
• Bulk supply – Road Tankers Domestic Supply.
• ISO containers / Flexi Pack, HDPE Drums, IBC Containers for Export Supply

Health & Safety
INDOLIGA SPR 250 does not fall into the hazard classifications of current regulations. However, it should not be swallowed or allowed to come into contact with skin and eyes.
Suitable protective gloves and goggles should be worn.
Splashes on the skin should be removed with water. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. If swallowed seek medical attention immediately – do not induce vomiting.
For further information consult the Material Safety Data Sheet available for this product.

Technical Support:
The technical department is available to assist you in the correct use of our products and its resources are at your disposable entirely without obligation.

Recently Viewed Products