INDOLIGA FSP-200 ( P 9505)

In Stock

Product Description

INDOLIGA FSP – 200 (P 9505) is differentiated from conventional superplasticisers in that it is based on a unique carboxylate polymer with long lateral chains. This greatly improves cement dispersion. INDOLIGA FSP – 200 (P 9505) combines the properties of water reduction and workability retention. It allows the production of high performance concrete/Mortar and/or concrete/Mortar with high workability. INDOLIGA FSP – 200 (P 9505) is a particularly strong superplasticiser allowing production of consistent concrete properties around the required dosage.


INDOLIGA FSP – 200 (P 9505) is a high performance superplasticiser intended for applications where increased early and ultimate compressive strengths are required, and it has been developed for use in:
• Non Shrinkage grouts
• Anchor Grouts
• Speciality Mortars
• Self levelling screeds.
• Plasters and renders
• High Performance Concrete


• Increased early and ultimate compressive strengths
• Increased flexural strength
• Higher E modulus
• Improved adhesion to reinforcing and stressing steel
• Better resistance to carbonation
• Lower permeability
• Better resistance to aggressive atmospheric conditions
• Reduced shrinkage and creep
• Increased durability


Appearance : Creamy to Off Brown free flowing powder.
pH : 7 +/- 1
Moisture Content : Max 5%
Bulk Density: 300 to 700 gm/lit
Chloride content: Nil


INDOLIGA FSP – 200 (P 9505) has a minimum shelf life of 12 months provided the temperature is kept within the range of 2°C to 50°C. The product has a tendency to agglomerate on storage. However it does not affect the
efficacy of the product if stored under the prescribed temperature conditions. Should the temperature of the product fall outside this range then contact us for advice

Health & Safety

INDOLIGA FSP – 200 (P 9505) does not fall into the hazard classifications of current regulations. However, it
should not be swallowed or allowed to come into contact with skin and eyes. Suitable protective gloves and goggles should be worn. Splashes on the skin should be removed with water. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. If swallowed seek medical attention immediately – do not induce vomiting. For further information consult the Material Safety Data Sheet available for this product.

Technical Support

The technical department is available to assist you in the correct use of our products and its resources are at your
disposable entirely without obligation.
Contact Us :


Recently Viewed Products