Product Description
INDOLIGA SPR – 55 is differentiated from conventional superplasticisers in that it is based on a unique carboxylate polymer with long lateral chains. This greatly improves cement dispersion. INDOLIGA SPR – 55 combines the properties of water reduction and workability retention. It allows the production of high performance concrete and/or concrete with high workability. INDOLIGA SPR – 55 is a particularly strong superplasticiser allowing production of consistent concrete properties around the required dosage. Disclaimer : Results may vary upon Trials
Uses
INDOLIGA SPR – 55 is a high performance superplasticiser intended for applications where increased early and ultimate compressive strengths are required, and it has been developed for use in:
• Self compacting concrete
• Pumped concrete
• Concrete requiring long workability retention
• High performance concrete
• Pre-cast concrete
Advantages
• Increased early and ultimate compressive
strengths
• Increased flexural strength
• Higher E modulus
• Improved adhesion to reinforcing and stressing
steel
• Better resistance to carbonation
• Lower permeability
• Better resistance to aggressive atmospheric
conditions
• Reduced shrinkage and creep
• Increased durability.
Properties
Appearance : Colour less to Light yellow/ brown colored liquid
pH : Min. 6
Solid Content : 55% +/− 1
Specific gravity: 1.10 +/− 0.2
Chloride content: Nil
Storage
INDOLIGA SPR – 55 has a minimum shelf life of 12 months provided the temperature is kept within the range of 2°C to 50°C. Should the temperature of the product fall outside this range then contact us for advice
Packaging
• INDOLIGA SPR – 55 is available in 225 KG drums
• Bulk supply – Road Tankers Domestic Supply.
• ISO containers / Flexi Pack, HDPE Drums, IBC Containers for Export Supply
Health & Safety
INDOLIGA SPR – 55 does not fall into the hazard classifications of current regulations. However, it should
not be swallowed or allowed to come into contact with skin and eyes. Suitable protective gloves and goggles should be worn. Splashes on the skin should be removed with water. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. If swallowed seek medical attention immediately – do not induce vomiting. For further information consult the Material Safety Data Sheet available for this product.
Technical Support
The technical department is available to assist you in the correct use of our products and its resources are at your
disposable entirely without obligation.
Contact Us : enquiry@lrc-india.com
